Industrial · Full catalog
All products: Metal-Mechanical Industry
All products in this industry. Search by name or filter by application.
Anti-Corrosive Protectives
Keen Prot SK
Dry-film protective for long-term protection and export.
Anti-Corrosive Protectives
Linha Keen Prot DWO
Water-displacing waxy-film protectives with 24 to 72 hours of salt spray protection.
Industrial Degreasers
Keen Clean T / SE
Alkaline degreasers for the technical cleaning of machined parts.
Anti-Corrosive Protectives
Linha Keen Prot PO
Oily-film protectives with high penetration and excellent humidity chamber performance.
Anti-Corrosive Protectives
Keen Prot S
Temporary waxy-film protective for parts between stages of the process.
Industrial Degreasers
Keen Clean 90
High-performance degreaser for heavy dirt.
Industrial Degreasers
Keen Clean 40
Solvent degreaser for light cleaning of parts and components.
Machine & Equipment Maintenance
Linha Tackness Plus
Adherent anti-drip lubricants for bearings, guides and chains: savings in oil and labor.
Machine & Equipment Maintenance
CompStar S
PAO synthetic for screw compressors, with drain intervals of 8,000 hours.
Machine & Equipment Maintenance
CompStar SS
Semi-synthetic for reciprocating and screw compressors, with drain intervals of 4,000 hours.
Machine & Equipment Maintenance
Linha Siberian
Naphthenic oils for refrigeration compressors, free of wax and moisture.
Industrial Degreasers
Keen Clean 60
Conventional degreaser for removing oils and greases.
Machine & Equipment Maintenance
Linha Supra AW
Anti-wear hydraulic oils (HLP/HVLP) for industrial and vehicular systems.
Machine & Equipment Maintenance
Linha Turan EP
Mineral EP oils for reducers and gears under shock loads.
Machine & Equipment Maintenance
Supra FSH
Detergent oil for flushing hydraulic systems.
Machine & Equipment Maintenance
Linha Supra
Oils for bearings and hydraulic systems, HL class.
Machine & Equipment Maintenance
Linha Supra AWD
Zinc-free detergent hydraulic oils (HLPD) that tolerate water and moisture.
Machine & Equipment Maintenance
Linha Supra HP
High viscosity index hydraulic oils (HVLP) for wide temperature variations.
Machine & Equipment Maintenance
Linha Turan S
100% synthetic gear oils (Groups IV/V), with wind turbines as a highlight.
Machine & Equipment Maintenance
Linha Slide
Non-drip oils for machine tool slideways that fight stick-slip.
Machine & Equipment Maintenance
Linha Tackness
High-adhesion oil for bearings: it does not drip or run off.
Industrial Degreasers
Keen Clean Bio
Water-soluble synthetic alkaline degreaser, nitrite-free.
Industrial Degreasers
Keen Clean System
Internal cleaning and disinfection of cutting fluid systems and reservoirs.
Industrial Degreasers
Keen Clean Multi
Multipurpose alkaline degreaser for general cleaning of parts and floors.
Anti-Corrosive Protectives
Keen Prot DWS
Solvent-based water-displacing protective: fast drying and 72 hours of protection.
Machine & Equipment Maintenance
HFDU FR 68
Fire-resistant hydraulic fluid, HFDU type, for operations with fire risk.
Machine & Equipment Maintenance
Keen Pump VC
Specific lubricant for pumps and compressors — formulation optimized for continuous industrial cycle.
Machine & Equipment Maintenance
CompStar Mineral
Compressor oil — mineral, complete ISO VG viscosity matrix.
Metalworking
Austenity Temp PO
Non-flammable quenching in aqueous solution: high quenching speeds with safety.
Metalworking
Keen AD
Concentrated inactive sulfur and chlorine additive to boost neat cutting oils.
Metalworking
Linha Keen Sol
Water-soluble cutting fluids for general machining.
Metalworking
Keen Sol SS
Mineral oil based semi-synthetic: a biostable, low-foam microemulsion.
Metalworking
Linha Keen Cut 100
Neat cutting oil for general machining operations on ferrous metals.
Metalworking
Linha Keen Cut 200
Neat cutting oil with EP performance for severe operations on alloy steels and stainless.
Metalworking
Linha Keen Cut 300
Neat cutting oil for ferrous and non-ferrous metals, including brass, copper and bronze.
Metalworking
Keen Sol SS EP
Semi-synthetic with extreme pressure additives for higher-load operations.
Metalworking
Linha Micro Corte
Honing and mist lubrication oil — light viscosity, high lubricity and excellent behavior in MQL systems.
Metalworking
Keen Sol S
Mineral oil free synthetic: a transparent solution for precision grinding.
Metalworking
Keen Sol S EP
Synthetic with extreme pressure: covers sawing, without staining aluminum or copper.
Metalworking
Keen Sol SE BF
Boron-free ester base: replaces neat cutting oils, with standout performance on aluminum.
Metalworking
Bio G 1000
Boron, chlorine, phenol and nitrite-free synthetic that separates tramp-oil.
Metalworking
Keen Sol SP
Soluble fluid high-performance with renewable polymers for machining — balanced cooling and lubrication.
Metalworking
Linha Keen Form
Lubricants for stamping, drawing and forming of metal sheets.
Metalworking
Linha Austenity
Quenching and heat treatment oils for ferrous metals.
Metalworking
Keen Sol SP 250 BF
Boron and triazine-free concentrated synthetic for strict environmental requirements.
Metalworking
Bio G 1006 BF
High-performance synthetic fluid — biorresistant, free of nitrite, phenolic compounds, boron and halogens.
Metalworking
Linha Micro Temp
High-stability quenching for hard-to-harden steels, without cracks.
Metalworking
Keen Cut EE
Colorless dielectric fluid for die-sinking EDM, with 24 kV dielectric strength.
Metalworking
Keen Sol SP 500
Concentrated synthetic from a renewable base: high dilution and savings.
Machine & Equipment Maintenance
Linha Bearing
Mineral oils for general lubrication and circulation under light conditions.
Machine & Equipment Maintenance
Linha Thermmo
Thermal fluids for indirect heating systems: heat without high pressure.