Kelpen Oil

Blog

Technical Blog

Articles, guides, and news on industrial and automotive lubrication

Gear oil: EP additive selectivity as a longevity factorTécnico Industrial
3 min de leitura

Gear oil: EP additive selectivity as a longevity factor

Conventional EP additives react with metal surfaces even when there is no severe load — attacking bronze, seals and generating sludge. The solution lies in the selectivity of the formulation.

ATF fluid: the spec was developed together with the transmission, not after itTécnico Automotivo
3 min de leitura

ATF fluid: the spec was developed together with the transmission, not after it

A modern automatic transmission is a hydro-mechanical system where the ATF is an engineering component. Using a different spec than the one designed in means running the hardware with parameters the project never considered.

Quenching oil: the controlled cooling that defines microstructure — and rework costTécnico Industrial
3 min de leitura

Quenching oil: the controlled cooling that defines microstructure — and rework cost

Quenching is one of the few industrial processes where an error has no second chance. A bad quench invalidates everything that came before — machining hours, raw material, machine setup.

Cutting fluid: the invisible architect of quality, durability and operational efficiencyTécnico Industrial
3 min de leitura

Cutting fluid: the invisible architect of quality, durability and operational efficiency

In precision machining, the choice of cutting fluid silently decides whether a part comes out within spec or becomes scrap, whether a tool lasts hundreds of cycles or dozens. The fluid is not a secondary consumable — it is a protagonist.

FEILUB: the mirror that reveals gaps between market demands and real capabilitiesMercado & Indústria
3 min de leitura

FEILUB: the mirror that reveals gaps between market demands and real capabilities

The lubricants industry faces an uncomfortable reality: there is a big gap between suppliers who claim quality and those who can prove it. FEILUB exists to shrink that gap.

Anti-wear hydraulic oil: designing systems to last decades, not yearsTécnico Industrial
4 min de leitura

Anti-wear hydraulic oil: designing systems to last decades, not years

A properly specified hydraulic system runs for decades. The same system with the wrong fluid starts degrading on the very first high-pressure cycle — gradually, microscopically, until the damage is already irreversible.

Lubricants laboratory: analytical validation as the real performance guaranteeLaboratório & Análise
4 min de leitura

Lubricants laboratory: analytical validation as the real performance guarantee

Every equipment failure has a measurable price. Trust in a lubricant cannot rest on commercial promises — it must be anchored in analytical data that proves compliance in every batch.

ISO 4113: when metrology is the non-negotiable foundation of qualityLaboratório & Análise
2 min de leitura

ISO 4113: when metrology is the non-negotiable foundation of quality

Calibrating injector pumps and common-rail nozzles requires a fluid that behaves as a metrological instrument. Understand why ISO 4113 and Bosch approval are prerequisites for real repeatability.